automation
Reently I got curious with how the heating temps are and as it's a heat pump measuting the pipe temps can in theory be done with a connection into the controller That needs a special device though so i decided that I would make it myself this is
electronics
Right another post time lol Meshtastic build here we go parts list: 1) A raspberry pi (if you using the Linux native stuff otherwise any Lora enabled board https://meshtastic.org/docs/hardware/devices/ supported stuff listed here) I am using a pi 4 for my router build (also an
electronics
well been a while since I made a post or did anything with this site lol Lately I've been down the plane tracking rabbithole as I mentioned in the last post and built a ads-b tracker system along with a few acars ones (https://airplanes.live and https:
3d printing
A few days ago I finally ordered the filament sensor for my prusa mini It came well packaged (got wet in the ran though hence no box..no fault of prusa or the delivery company) It uses an ir led and some printed parts (Mine came preassemabled as I bought
3d printing
needed: 1) esp01 or esp01s module amazon: https://amzn.to/3Hbtw0F (prusa also sells one https://prusa3d.com/product/wi-fi-adapter-esp-01s-for-mini-and-mk4/ ) aliexpress: https://s.click.aliexpress.com/e/_DBYmhLR (affiliate link) 2) 2.5mm allen key 3) prusa mini of course 4) pliers to get the power switch out possibly 5)
automation
parts needed: 1. nodemcu esp 8266 or esp32 (both work but I like the esp32 for most projects these days because of it having bluetooth also) this is a link to a esp32 for example https://amzn.to/3HckIYE 2. (link is a amazon affiliate link see disclaimer) 3. micro